1/2 Finished the Scraping

I’m half finished the scraping inside the hull. I would guess I have about 3 hours left on the other side of the hull. I’m not sure how it will all turn out, using the rounded scrapers puts slight “channels” or rounded grooves along the wood where you scrape. Since the plan is just to glass the interior without filling the weave, I don’t think it will make any difference.

My biggest worry is that the very bottom of the hull did not hold its shape when removed from the moulds. It sort of flattens out and actually popped up a bit. I need to press down on the bottom to get it to take the intended shape.

scraped