Almost finished

Just a few more steps left to finish the Tern14! I think my list of things to do, in order, are as follows: 1.1 glass 2nd side of bulkhead panels 1.2 epoxy the hip braces in the cockpit 1.3 cutout the stern hatch 2.1 tweak the inside shear seam tape and epoxy 2.2 precoat the hatch strap fixtures 3.1 epoxy the bulkheads in 3.2 epoxy the strap fixtures to the hatches 4.1 apply the WR-LPU polyurethane finish 5.1 drill slots for webbing / deck rigging 5.2 fill the slots with thickened epoxy 6.1 drill new slots in epoxied areas

I’m not sure if I’ll do the webbing /deck rigging before or after the WR-LPU. I think I’ll do the lpu first, then the slots sometime in the future. I can touch up the slot edges with lpu afterwards.